Ingersoll Rand
 |
 INGERSOLL RAND PNEUMATIC IMPACT HD MODEL A  US $1,289.00
|
 Ingersoll Rand 2934B 2 1 Impact Wrench Reconditioned US $1,250.00
|
 INGERSOLL RAND TAMPERING AIR PNEUMATIC TOOL G10G22971 US $799.95
|
![Ingersoll Rand 2141P 3 4 Drive Impact Gun Ingersoll 1200 Ft Lb Impact CH2]](http://www.oscast.com/images/e/180864600521_0.jpg)
 Ingersoll Rand 2161XP 3 4 Ultra Duty Air Impact IR US $590.00
|
 INGERSOLL RAND 3 4 SQUARE DRIVE IMPACT TOOL 1720P US $549.95
|
 Ingersoll Rand 2161 3 4 Impact Wrench Reconditioned US $500.00
|
 Ingersoll Rand 261 6 3 4 Impact w 6 Extension IR261 6 US $479.00
|
 Ingersoll Rand 285B 6 1 Impact 6 Anvil IR285B 6 US $449.00
|
 Ingersoll Rand 271 1 Super Duty Air Impact Wrench IR US $448.00
|
 UNUSED Ingersoll Rand Torque Control Air Impact Wrench US $399.99
|
 Ingersoll Rand1 2 AIR IMPACTOOL US $379.99
|
 Ingersoll Rand 261 3 4 Super Duty Air Impact IR261 US $367.00
|
 Ingersoll Rand 244A 1 2 Impactool Air Impact IR244A US $199.00
|
 Ingersoll Rand Airdrill 728NA3 US $198.50
|
 INGERSOLL RAND PROFESSIONAL TOOLS AIR SHEAR HEAVY DUTY NEW IN BOX US $179.99
|
 Ingersoll Rand 90 Degree Torque Driver 700 Rpm US $175.00
|
 3 4 Impact Ingersoll Rand Air Impact Wrench 8 CFM Model 259 US $175.00
|
 Ingersoll Rand 3 4 Impact Drill US $170.00
|
 Ingersoll Rand 2135PTIMAX Air Impact Wrench TORQUE TESTED 1 2 dr 1100 ft pd BBT US $164.15
|
 INGERSOLL RAND 1 2 IMPACT WRENCH US $160.00
|
 INGERSOLL RAND 231 IMPACT WRENCH MODEL A US $160.00
|
 Ingersoll Rand ARO 635392 Control Handle Hose Non Drip Tip US $160.00
|
 INGERSOLL RAND M 280P IMPACT WRENCH 3 8 US $159.00
|
 Ingersoll Rand Rattle Tattler 8205 Model A Impact Air Tool US $157.50
|
 INGERSOLL RAND IMPACT WRENCH 2705A1 US $155.00
|
 INGERSOLL RAND IMPACT WRENCH US $150.00
|
 IR INGERSOLL RAND 7803 AIR Driver Drill 1 2 w chuck and Porter Cable reversible US $149.99
|
 New Ingersoll Rand 2131QT 1 2 Impact Air Wrench US $134.99
|
 IR Ingersoll Rand K6U Air Winch Parts ram compressor US $129.00
|
 Ingersoll Rand 231C 1 2 Super Duty Air Impact Wrench US $128.99
|
 Ingersoll Rand Impact Wrench US $110.00
|
 Ingersoll Rand 371 Air Screwgun IR371 IR US $105.00
|
 1 Pneumatic Impact Ingersoll Rand IR 2940 Tune Up Kit US $104.99
|
 1 2 Drive Ingersoll Rand Air Impact Wrench Model 231C US $85.00
|
 Ingersoll Rand Air Hammer 2 9 32in Stroke 3000 BPM 3 CFM Model 121 K6 US $85.00
|
How to wire an ingersoll rand model 2475 air compressor?
The coil on a contactor burned up so another person removed all of the wires from it and I am not sure where they go back.
There is an oil pressure switch and an air pressure switch. It is 480 volts three phase. The schematic is not helpful in showing where to put the control wires. There is a normally open relay on the side of the contactor. I know that 2 and 4 need to be jumped but I do not know where the others go.
The oil pressure switch and the air pressure switch should start and stop the motor relay. The control relay is fail safe NO. So have those switches control the relay. Hard to explain without knowing exact parts and control voltages. Is control voltage fed from a 480v transformer in the motor starter? Is it 120 vac controls? Is it a motor starter with aux contactors or an discrete relay?
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.