Rebuild Kit
 |
 Bostitch SX150 Finish Stapler Rebuild Kit  US $52.99
|
 Bostitch N62FN Finish Nailer Rebuild Kit US $52.99
|
 Bostitch BT200 Brad Nailer Rebuild Kit US $50.99
|
 Senco SN2 SNII Framing Nailer O ring Rebuild Kit US $9.00
|
 Senco SFN2 SFNII Finish Nailer O ring Rebuild Kit US $9.00
|
 Senco Finish Nailer SFN2 SFNII O ring Rebuild Parts Kit US $9.00
|
 Senco Stapler PW PW 2 O ring Rebuild Kit Parts US $8.95
|
 Senco Stapler Nailer L Model O ring Rebuild Parts Kit US $8.95
|
 Senco Stapler Nailer L Model O ring Rebuild Parts Kit Lowest COST US $8.94
|
 Senco Model J Stapler O ring Rebuild kit US $8.75
|
 Bostitch Stapler P50 O ring Rebuild Kit US $9.25
|
 Bostitch T36 Stapler Staple Nailer Rebuild O ring Kit US $8.40
|
what kind of rebuild kit can i get for the turbo on my 89 volvo 740?
i pulled the turbo off my 89 volvo 740 turbo and i need to find a rebuild kit. the numbers on the turbo are tb03 and 466672-3002. the turbo is a garrett turbo. is this turbo a t3 turbo. if so can i get the garrett t3 rebuild kit and get it going again. i need to get it going asap. thanks.
if you like to do everything yourself you can maybe rebuild your center with just the bearing/seal kit. but i suggest you consider buying a whole new/rebuilt center and doing it that way. less worry about getting it aligned right( if you dont put the wheels back on the EXACT same place the balence will be off). with a whole center you just bolt it all back together and go. i cant tell you where to look but if you have a shop around for big trucks you might ask them. internet too. always prime you new turbo with the best darn oil you have when assembling. id force some in there with a hose and squeeze bottle. i wouldn't know about garret but i replaced the center in my IHI turbo with a BRAND NEW one for less than 500$. the rebuilt one was like 350 or so with a core.
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.