Set Fits Stihl
 |
 AIR FILTER SET FITS STIHL TS400BOX OF 20 FILTER SETS  US $160.00
|
 CYLINDER PISTON KIT GASKET SET FITS STIHL TS400 US $122.00
|
 AIR FILTER SET FIT STIHL TS350 Box of 10 US $110.00
|
 AIR FILTER SET FITS STIHL TS400 12 PAK US $99.00
|
 CYLINDER AND PISTON GASKET SET OIL SEALS BEARING KIT Fits STIHL 046 MS460 52mm US $75.99
|
 AIR FILTER SET FITS STIHL TS460 510 760 5 SETS US $74.00
|
 AIR FILTER SET Fits STIHL TS410 TS420 COMBO 5 PACK US $59.90
|
 CYLINDER PISTON GASKET SET PLUG FILTER Fits STIHL TS400 US $57.99
|
 5 AIR FILTER SETS FIT STIHL TS350 CUT OFF SAW US $57.00
|
 AIR FILTER SET FITS STIHL TS350 360 5 SETS US $55.00
|
 AIR FILTER SET Fits STIHL TS410 TS420 COMBO 3 PACK US $39.99
|
 2 AIR FILTER SETS FITS STIHL TS410 TS420 CUT OFF SAW US $32.00
|
 2 AIR FILTER SETS FITS STIHL TS460 TS760 US $31.00
|
 AIR FILTER SET Fits STIHL TS410 TS420 COMBO 2 PACK US $28.99
|
 Crankshaft bearings set Fits STIHL TS760 TS510 050 051 075 076 Aftermarket US $25.99
|
 GASKET SET FITS A STIHL TS410 TS420 US $18.95
|
 GASKET SET OIL SEALS Aftermarket Fits STIHL TS350 TS360 08 US $18.39
|
 CRANKSHAFT BEARINGS SET AFTERMARKET Fits STIHL TS400 US $17.99
|
 AIR FILTER SET FITS STIHL TS410 TS420 CUT OFF SAW US $16.95
|
 GASKET OIL SEALS SET AFTERMARKET Fits STIHL TS760 US $16.39
|
 AIR FILTER SET FITS STIHL TS460 510 760 US $15.95
|
 GASKET SET FITS A STIHL TS400 OEM 4223 007 1050 US $15.95
|
 GASKET SET FITS A STIHL TS350 OEM 4201 007 1050 US $15.95
|
 GASKET SET FITS A STIHL TS460 OEM 4221 007 1050 US $15.95
|
 GASKET SET FITS A STIHL TS760 REPLACES OEM 1111 007 1051 US $15.95
|
 AIR FILTER SET FITS STIHL TS760 US $15.75
|
 AIR FILTER SET FITS STIHL TS460 TS760 US $15.75
|
 AIR FILTER SET Fits STIHL TS410 TS420 COMBO US $14.90
|
 GASKET OIL SEALS SET AFTERMARKET Fits STIHL TS410 TS420 US $14.89
|
 PISTON RINGS SET AFTERMARKET Fits STIHL TS410 TS420 US $12.99
|
 AIR FILTER SET FIT STIHL TS510 US $12.95
|
 AIR FILTER SET FITS THE STIHL TS360 CUT OFF SAW US $12.50
|
 GASKET OIL SEAL REBUILD SET Fits STIHL TS 410 TS420 US $12.39
|
 AIR FILTER SET FITS STIHL TS350 360 US $11.99
|
 Stihl TS400 Gasket Set w crank seals New aftermarket fits TS400 cutoff saw US $11.99
|
 AIR FILTER SET FIT STIHL TS350 US $11.95
|
 PISTON RINGS SET AFTERMARKET Fits STIHL TS400 TS 400 US $9.99
|
 OIL SEALS SET Aftermarket fits STIHL TS400 US $9.99
|
 PISTON RINGS SET AFTERMARKET Fits STIHL TS460 US $7.78
|
what chain/sprocket do loggers use on husqvarna chainsaws (455 rancher)?
my dad had a husky model 50 which is pretty much the same as the rancher 455 which i have. he paid $100 extra to get a more aggressive chain which he had to also buy a different sprocket, he said it was the same as the loggers used but my question is can i have this set up on my 455 rancher and what do i need to buy. the chain that's on it is good for smaller stuff but it can't touch his model 50 with the bigger chain. the 455 rancher has the power but i think i will make a world of difference with a wider meatier chain. if you have this set up for your 455 rancher let me know how much of a diff it makes. also my cousin told me that stihl makes better chains could i get the better sprocket and fit a stihl chain on it. my dad said the bigger chain had diff spacing in the teeth that the sprocket bites but i couldn't find it on the internet
The problem you are having is with a thing called chain pitch. Chain pitch is the measurement between three rivets on the chain and dividing by 2. There are 4 common sizes, 1/4", .325", 3/8" and .404". The 1/4" in used on small saws and tends to be expensive because of the number of parts to cover a certain length. .325" chain is most likely what you have on the Rancher. Its used mostly in consumer and mid-range saws because it does not require as much power as the bigger chain does. 3/8" chain has two sizes, the regular and the low profile. Low profile is what you see on the small entry level saws. The regular 3/8" chain is most likely what your dad has on his saw. Its used on heavy applications, where the saw has moe power. The .404" chain is used on the big saws over 30" and most likely you won't see this chain.
Next you mentioned the cutter tooth. There are 2 basic designs the semi-chisel and the full chisel. The best way to explain it is to see the link I am posting, it shows the difference in the shape of the teeth. http://www.arboristsite.com/chainsaw/158648-4.htm
Semi chisel is good for dirty wood and good in most wood. The full chisel has minimum cutting friction for a smooth cut in hard or frozen wood.
Stihl is the only saw manufacturer that makes their own saw chain.
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.